FEH Escalator Heavy Duty

Weatherproof and unique balastrade design,conform to special customer specification.It is sıit for airport, subway and overpass etc.

Type FEH
Inclination 30 C / 35 C
Step Width 600 / 800 / 1000
Horizontal Step Run (mm) 800 / 1200 / 1600
Speed (m/s) 0.5 / 0.65
Pawer Supply AC 3 phase, 5 wire 50 Hz / 60 Hz
Installation Position Indoor / Outdoor
Rise (m) 2 – 12.5
Type Standart Optional
Balustrade Design Vertical Safety Glass (100 mm Safety tempered glass) Vertical / Inclined ST / ST
Balustrade Profile
Handrail Black
Deckings Hairline ST / ST
Skirting Panel  Hairline ST / ST
Step ST / ST Die-cast Aluminium,Painted with silver gray,Blaack color / yellow color resin demarcetion
Landing Plate Etched ST / ST with anti-slip pattem / Aluminium with anti-slip grooves
Operation Panel Red emergency stop button and up-down key switch Traffic Light

FES Escalator Commercial Type

Silence and comfort.The new generation has inherited the traditonal safety, reliability,high efficiency style and combined with updated marked used for shopping malls,Hotels,office blocks and etc.

Type FES
Inclination 30 C / 35C
Step Width (mm) 600 / 800 1000
Horizontal Step Run (mm) 800 / 1200
Speed (m/s) 0.5
Power Supply AC 3 Phase. 5 wire 50 Hz / 60/Hz
Installation Position Indoor / Outdoor
Rise (m) 2-7.5
Type Standart Optional
Balustrade Design Vertical safety flass ( 10 mm safety tempered glass)
Balustrade Profile Hairline ST / ST
Handrail Black Other Colors
Deckings Hairline ST / ST
Skirting Panel Hairline ST / ST
Step ST / ST / Aluminium alloy, Painted with silver gray , or Black color
Landing Plate Etched ST / ST with anti-slip pattern / Aluminium
Operation Panel Red emergency stop button and up-down key switch Traffic light

Passenger Conveyor

Is reliable, high efficiency,easy maintenance,which is suit for hypermarket and airport.

Specs Passenger Conveyor
Type FET FEF FEW
Inclination 10 C / 11 C / 12C 10 C / 11 C / 12C 0 C – 6 C
Pallet Width (mm) 800 / 1000 800 / 1000 1000 / 1200 / 1400
Horizontal Pallet Run (mm) 400 (upper landing) 400 / 800 N / A
Speed (m/s) 0.5
Power Supply AC 3 phase. 5 wire 50 Hz / 60 Hz
Installation Position Indoor / Outdoor
Rise / Length (m) H:2-8 H:2-8 L:120
Type Standart Optional
Balustrade Design Vertical safety glass (10 mm safety tempered glass) Inclined ST / ST for FEW
Balustrade Profile Hairline ST / ST
Handrail Black Other colors
Deckings Hairline ST / ST Hairline ST / ST
Skirting Panel Hairline ST / ST Teflon coating
Pallet Die-cast aluminium, Painted with silver gray. Black color
Landing Plate Etched stainless steel with anti-slip pattern Aluminium with anti-slip grooves
Operation Red emergency stop button and up-down key switch Traffic light

Standart Features

Standart FES FEH FET / FEF / FEW
Skirting Contacts
Handrail Entry Contacts
Step / Pallet Chains Contatcts
Phase Monitor
Motor Overload
Motor Overheat
Comb Contacts
Step Gap Illumination
Maintenance Interlock Protection
Alarm Buzzer
Speed Monitor With Electrical Reverse Detection
Step/Pallet anti – static Brush
Emergeny Stop Button
Step/Pallet Reversing Fences
Handrail Anti – Static Roller
Service Brake Release Contacts
Safety Brake On Main Shaft
Soft Stop
Step/Pellet Sag Contacts

Optional Features

Optional          FES                  FEH          FET / FEF / FEW
Handrail Colour
Step / Pallet Colour
Surge Protection
Step Safety Demarcation
Fire Interface
Dry Contact for Remote Monitoring System
Automatic Lubrication System
Comb Heating System
Truss Heating System
Fault Diagnostic System
Step/Pallet Missing Monitor
Brake Distance Monitor
Handrail Speed Monitor
Skirting Brush
VVVF Control
Outside Cladding
Safety Brake On Main Shaft
Traffic Light
Comb Light
Skirting Lighting(LED Dot Light)
Landing Plate Contact
Handrail Broken Contact
Step Upthrust Contact
Float Contact
Drive-chain Contact
Cable Connector for Intersection
Auto-start

FES Layout for Commercial Escalator

Type a AA BB CC FF JJ KK
FES-302 30 C 2195 2564 H x 1.732 4200 870 7900
FES-352 35 C 2229 2648 H x 1.428 4000 850 7100
FES-303 30 C 2595 2964 H x 1.732 4600 870 8300
FES-353 35 C 2629 3048 H x 1.428 4400 850 7500

.

For slim-vertical balustrade

A 600 800 1000
B 837 1037 1237
C 1145 1345 1545
D 1200 1400 1600
E 1850 2050 2250
Type a DD EE MM
angle turss pipe turss angle turss pipe turss angle turss pipe turss
FES-302 30 C 2230 2205 2470 2482 960 940
FES-352 35 C 2385 2352 2450 2455 980 960
FES-303 30 C 2630 2605 2870 2882 960 940
FES-353 35 C 2785 2752 2850 2855 980 960
A Reaction Force (KN)
W/0 intermediate support With one intermediate support
600 R1= 3.35 x L + 15.5
R1=3.35 x L2 +11.5
R2=3.35 x L1 + 4.5
R3=3.35 x L + 3.5
R2= 3.35 x L + 10
800 R1= 3.7 x L + 17
R1=3.7 x L2 + 12
R2=3.7 x L1 + 4.7
R3=3.7 x  L + 4
R2= 3.7 x L + 11
1000 R1= 4.15 x L + 18.5
R1=4.15 x L2 + 12.5
R2=4.15 x L1 + 4.9
R3=4.15 x L + 4.5
R2= 4.15 x L 11.5
NOTE: 1-) L, L1, L2 is in meter

We reserve the right to alter some of specifications and descriptions given herein without prior notice.

NOTES:

  1. Definitions:
  • Mark *1 : Supports need to be in true level.
  • Mark *2 : If there is pit , pit need to be water proof and smooth.
  • Mark *3 : If dimension E can’t be quaranteed , a guard acc. EN115 must be provided as shown (by others)
  • Mark *4: Only for outdoor installation.

2. According to EN115 , the entrance of both landing must have enough area to facilitate the traffic flow.

3. Dimension with mark * should be extended 500 mm in case 600 mm step or double drive or in case VVVF.

4. Intermediate support is reinforced in case of horizontal over 15m please contace us.

5. All dimension refer to finished dimension is in mm